|
Service- und Ersatzteile - Griffith
|
|
|
125 amp fuse
PART No: M1980
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
4.0 Ltr camshaft
PART No: E0158
Powers performance 4.0 Ltr camshaft.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
5ltr pistons
PART No: E2593 E2594
Pistons come complete with rings and pins
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
82 deg thermostat
PART No: E2027
Standard 82 deg thermostat
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Air filter Griffith
PART No: E2503
Genuine pipercross filter for the Griffith.
Models: griffith, griffith pre-serp.
|
|
|
|
Air flow meter
PART No: E2036
Only compatible with serpentine models
Models: chimaera, griffith.
|
|
|
|
Aircon condensor
PART No: P0642
Replacement aircon condensor
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge, n/a.
|
|
|
|
Aircon reciever drier
PART No: P0121
Aircon receiver drier. It is advisable to replace this item every time
there is a major loss of gas or any damage to another part of the
aircon system.
Models: tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Aircon trinary switch
PART No: P0031
Aircon trinary switch, fits all models from griffith onwards.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Aircon unit oil
PART No: PAG OIL
Aircon unit Pag oil. Used when re gassing a vehicles aircon unit.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Aluminium radiator
PART No: K0359-ALI
Quality replacement all aluminim radiator. this radiator is fitted with
the insert for the early models which house the fan switch, but is also
compatible with the later models. An aluminium bung is available for
models which do not use this application.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Aluminium rocker arm
PART No: E0277
Genuine aluminium rocker arm
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Battery
PART No: MVBZ8
Heavy duty battery fits to all TVR models. This battery carries a 3 year warranty.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Belt tensioner (aircon)
PART No: P0136
Aircon belt tensioner for both Griffith and Chimaera. This tensioner has a smooth pulley wheel.
Models: chimaera, griffith.
|
|
|
|
Belt tensioner (non aircon)
PART No: E2213
Standard belt tensioner for the Griffith and Chimaera. This tensioner has a ribbed pulley wheel.
Models: chimaera, griffith.
|
|
|
|
Block core plug
PART No: E0386
Block core plug.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Bonnet relaese cable
PART No: U0422
Bonnet release cable for the Griffith & Chimaera.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Brake light microswitch
PART No: M0325
Brakelight activating microswitch, not for speed 6 models
Models: cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge, n/a.
|
|
|
|
Brake master cylinder & resevoir
PART No: J0089
Replacement brake master cylinder for the Cerbera, Griffith & Chimaera.
Models: cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Brake pads (front)
PART No: J0045
Brake pads for Griffith & Chimaera with 240mm discs
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Brake servo
PART No: J0088
Brake servo for the Cerbera, Griffith & Chimaera.
Models: Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Camshaft core plug
PART No: E0251
Camshaft core plug.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Camshaft gear
PART No: E0267
Camshaft gear for the Griffith Chimaera & earlier model V8 engines.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge, n/a.
|
|
|
|
Clutch fork
PART No: Q0055
Clutch fork for all Griffith & Chimaera models
Models: tuscan, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Clutch fork pivot bolt
PART No: Q0015
Pivot bolt for clutch fork
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Clutch fork slipper pads
PART No: E0436
Slipper pads are fitted to the clutch fork to enable the bearing carrier to be located.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Clutch master cylinder
PART No: Q0012
Clutch master cylinder for Griffith, Chimaera & cerbera. When
replacing the master cylinder the push rod lengths need to be matched.
Models: cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Clutch push rod
PART No: Q0053
Push rod for Griffith & chimaera clutch mechanism.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Clutch push rod clip
PART No: Q0054
Push rod clip for locating clutch push rod
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Clutch slave cylinder
PART No: Q0315, Q0316, Q0317
Latest spec clutch slave cylinder. If being fitted to an early cerbara please contact for fitting information.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, griffith pre-serp.
|
|
|
|
Clutch slave cylinder
PART No: Q0056
Clutch slave cylinder for Griffith & Chimaera. Also compatible with the early V8S
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Clutch thrust bearing
PART No: F0163
Clutch release bearing for all TVR models.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Con rod bolt.
PART No: E3737
Universal con rod bolt. Not compatible with the 4.6 rover con rod.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Coolant temperature sensor
PART No: E0376
Coolant temperature sensor for the serpentine Griffith & Chimaera. Ecu sensor.
Models: chimaera, griffith.
|
|
|
|
Copper head gasket
PART No: E0263
Powers Performance copper head gasket.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Crankshaft balance damper (serpentine)
PART No: E0464
This item must be balanced before fitting. Please contact for details.
Models: chimaera, griffith.
|
|
|
|
Cylinder head gasket
PART No: E2085
Quality replacement head gasket.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Damper bush
PART No: C0092
Damper bush for all TVR models.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Diff mounting bracket btr diff
PART No: R0086
Diff mounting bracket for the BTR diff>
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith.
|
|
|
|
Diff mounting bracket btr diff
PART No: R0087
Reproduced diff mounting bracket for the BTR diff.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, n/a.
|
|
|
|
Diff mounting bush rear top (BTR) orange spot
PART No: R0064
Diff mount bush for the BTR diff
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith.
|
|
|
|
Diff mounting bush, side mounts (BTR) white spot
PART No: R0063
Diff mounting bush for the BTR diff
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith.
|
|
|
|
Distributor cap
PART No: E0268
Quality replacement distributor cap.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Door courtesy light switch
PART No: M0398
Door courtesy light switch for the Griffith & Chimaera.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
double valve spring
PART No: E0151
Uprated double valve spring for the Rover V8 model vehicles.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Drive shaft cv joint rubber boot kit
PART No: R0305
Drive shaft cv joint kit, compatible with all the tvr range from Griffith onwards.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Engine assembly grease
PART No: Z0158
Quality white engine assembly grease, for use when prepping all engines.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Engine mount restraint
PART No: E0053-1
Power Performance has developed this item to support the existing engine mount.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Engine mounting rubber
PART No: E0053
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Exhaust hanger bolt mounting rubber
PART No: S0169
Exhaust bolt mounting rubber for the Griffith, Chimaera and Tuscan.
Models: tuscan, tuscan s, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Exhaust manifold to y piece clamp
PART No: S0161
Original exhaust manifold to y piece clamp for the Griffith & Chimaera.
Models: chimaera, griffith.
|
|
|
|
Exhaust manifold gasket
PART No: S0091
Quality o.e exhaust manifold gasket, can be fitted to all V8 models, except cerbera.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Exhaust u clamp
PART No: S0145
75mm exhaust u clamp for the Griffith & Chimaera. To connect the
exhaust y piece to the main exhaust system.
Models: cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Exhaust valve (large)
PART No: E0171
Exhaust valve for the V8 engine modified cylinder heads.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Fan switch
PART No: M0221
Interior fan control switch for the Griffith & Chimaera.
Price: £22.00
Models: chimaera, griffith, chimaera pre-serp.
|
|
|
|
Filler cap
PART No: K0071
O.E expansion tank filler cap.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Flexi brake hose (front)
PART No: J0124
Original front flexi brake hoses compatible with all Griffith and Chimaera
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Front brake disc
PART No: J0001
Front brake discs for the early Griffith & Chimaera. 240mm
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Front brake disc
PART No: J0146
Front brake disc for the Griffith& Chimaera. 260mm
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Front cover gasket (non serpentine)
PART No: E0155
O.E front cover gasket. non serpentine engines only.
Models: chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Front cover gasket (serpentine)
PART No: E0155-1
O.E front cover gasket serpentine engines only.
Models: chimaera, griffith.
|
|
|
|
Front crank seal
PART No: E0169
Replacement front cover oil seal for both serpentine & non serpentine models.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Front head lamp lens (RH) Tinted
PART No: U0531
O.E Griffith front lamp lens.
Models: griffith, griffith pre-serp.
|
|
|
|
Front pulley bolt
PART No: E0260
Front pulley bolt for the Griffith, Chimaera & any early V8 model.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Front wheel bearing
PART No: C0004
Front wheel bearing for the Griffith & Chimaera.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Front wheel bearing seal
PART No: C0003
Front wheel bearing oil seal for the Griffith & Chimaera.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Fuel cooler
PART No: P0195
Fuel cooler for the Griffith, Chimaera & Cerbera V8.
Models: cerbera V8, chimaera, griffith.
|
|
|
|
Fuel pressure regulator
PART No: E0208
Fuel pressure regulator for the early V8 models.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Fuel rail standpipe fitting
PART No: L0168
Fuel rail standpipe fitting, with olive, fitted to all early V8 models.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Fuel tank sender
PART No: L0172
Models: tuscan, tuscan s, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Fuseable link holder
PART No: m0494
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Gearbox bell housing T5 box
PART No: F0170
T5 gearbox bell housing.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Gearbox mount
PART No: F0428
Gearbox mount.
Models: tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Gearbox pivot ball, bush & circlip
PART No: U0366, U0367, U0368
Gearbox pivot ball, bush & circlip.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Gearbox rear seal (t5)
PART No: T45 F043R
this seal is only compatible with the early style t5 gearbox.
Models: tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Gearbox rear seal (t5) late model
PART No: T45F 167R
This seal is only compatible with the late model t5 gearbox
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith.
|
|
|
|
Gearbox retainer seal (t5)
PART No: T45F 054R
Compatible with both versions of t5 box
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Griffith boot badge (gold)
PART No: U0558
Griffith gold boot badge.
Models: griffith, griffith pre-serp.
|
|
|
|
Griffith lower lamp unit
PART No: M0129
Lower lamp unit for the Griffith.
Models: griffith, griffith pre-serp.
|
|
|
|
Griffith upper lamp unit
PART No: M0127
O.E Griffith upper lamp unit.
Models: griffith, griffith pre-serp.
|
|
|
|
Hand brake cable
PART No: J0112
Handbrake cable for all models except Cerbera.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge, n/a.
|
|
|
|
Headlamp (dip)
PART No: M1300
Headlamp, fits to Tuscan, T350 & Sagaris as standard. This lamp is
also used on the Chimaera & Cerbera with the headlamp conversion.
Models: sagaris, tuscan, tuscan s, t350, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
heat sink bracket assembly
PART No: E2098
Models: chimaera, griffith.
|
|
|
|
Hella tyre pressure control system
PART No: POWTPG
The system can be used in all vehicles with a 12 V vehicle electric
system. Hazardous situations in road traffic, which are based on faults
with regard to the tyres of vehicles can frequently been monitored by
permanent tyre pressure control.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
High horn
PART No: M0130
High horn for all TVR models.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Hydraulic lifter
PART No: E0274
Replacement hydraulic lifters.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Idler bearing
PART No: H0221
Idler bearing assembly for non power assisted vehicles.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
ignition module (2 pin)
PART No: E0411a
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
ignition module (3pin)
PART No: E0411
Models: chimaera, griffith.
|
|
|
|
Inlet valve (large)
PART No: E0170
Large inlet valve for the Griffith & Chimaera uprated cylinder head.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Jump start lead set
PART No: M1393
Jump start lead set.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Key fob battery
PART No: CR1220
Replacement key fob battery. 2 per key fob.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Lambda (oxygen) sensor
PART No: M0157
NGK lambda sensor fitted to the Griffith, Chimaera and V8 cerbera.
Models: cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Long cylinder head stretch bolts
PART No: E2087
Replacement cylinder head bolt.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Low horn
PART No: M0131
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Lower ball joint
PART No: C0036
Lower ball joint for the Griffith & Chimaera.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Lower steering universal joint
PART No: H0073
Lower steering joint for non power assisted vehicles.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Main beam & side light unit
PART No: M1753
Main beam & side light unit, fits to the Tuscan, T350, &
Sagaris as standard. This lamp is also used on the Chimaera &
Cerbera with the headlamp conversion.
Models: sagaris, tuscan, tuscan s, t350, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Main bearings (2.3")
PART No: E0160
A.E vandervall replacement main bearing kit for the small journal blocks.
Models: cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Manifold to y piece gasket (large diameter 6 hole)
PART No: S0101
Manifold to y piece flange gasket. 150 mm outer diameter.
Models: chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Manifold to y piece gasket (small diameter 8 hole)
PART No: S0099
Manifold to y piece flange gasket. 138mm outer diameter.
Models: griffith pre-serp, wedge.
|
|
|
|
Mirror glass lh non heated
PART No: S29U 10309
Replacement non heated mirror glass
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Mirror glass rh non heated
PART No: S29U 10308
Replacement non heated mirror glass.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Nitron Racing shock absorber kit
PART No: NTEIBACHUP
Nitron Racing fully adjustable shock & spring kit is available for
the entire TVR range. Now fitted with an upgraded Eibach race spring.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Oil pick up pipe gasket
PART No: E0196
Replacement oil pick up pipe gasket.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Oil pressure switch
PART No: N0126
Oil pressure switch for the serpentine Griffith & Chimaera.
Models: chimaera, griffith.
|
|
|
|
Oil pump base assembly (pre serpentine)
PART No: E0446
Oil filter & gear housing pump base unit for the pre serpentine Griffith & Chimaera.
Models: chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Oil pump gasket (pre serpentine)
PART No: E0197
Replacement oil pump gasket for the pre serpentine Griffith & Chimaera.
Models: chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Oil pump gears
PART No: E0465/gear
Replacement oil pump gears for the serpentine Griffith & Chimaera.
Models: chimaera, griffith.
|
|
|
|
Plug shroud adapter
PART No: E0142
Plug shroud adaptor for the early V8 models.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Power clutch cover
PART No: POWCOVER
Suitable for the Griffith & Chimaera 4.0 ltr through to 5.0 ltr engines.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Power clutch plate
PART No: POWPLATE
Suitable for the Griffith & Chimaera 4.0 ltr through to 5.0ltr engines.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Power steering fluid resevoir
PART No: H0169
Power steering reservoir bottle.
Models: tuscan, tuscan s, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Power steering pump
PART No: H0264
Power steering pump.
Models: tuscan, tuscan s, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Racing red Nitron shock absorber kit
PART No: RACING RED
Newly developed Nitron Racing Red shock & spring kit is available for the entire TVR range.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Radiator mount bush
PART No: K0092
Radiator lower mount bush.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Rear anti roll bar drop link
PART No: D0096
Rear anti roll bar drop link for the Griffith, Chimaera and the early Cerbera V8.
Models: cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Rear brake disc
PART No: J0106
Rear brake disc for the Griffith & Chimaera. 252mm
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Rear brake disc
PART No: J0136
Rear brake disc for the Griffith & Chimaera. 272mm
Models: griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Rear crank seal
PART No: E0167
Replacement rear crank shaft oil seal.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
rear main block cross seal
PART No: e0168
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Rear ouput flange lh
PART No: R0039
Lh rear output flange for the whole TVR range.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Rear output flange rh
PART No: R0038
Rh rear output flange for the whole TVR range.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Release bearing carrier
PART No: T45F 020R
Clutch release bearing carrier. This re designed carrier is to replace
the early land rover plastic bearing carrier, it also uses the latest
spec bearing used on later model TVR's.
Models: chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Rocker cover filter
PART No: E2116
Rocker cover filter for the Griffith & Chimaera.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Rocker cover gasket (cork)
PART No: E0165
Cork rocker cover gasket for the cast rocker covers on the Griffith, Chimaera and the V8S.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Rocker cover gasket (rubber)
PART No: E3458
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
SHORT CYLINDER HEAD STRETCH BOLT
PART No: E2086
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Silicone emission duct
PART No: E9080
Powers performance silicone emission duct for the upgraded large bore plenum.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Solenoid
PART No: M0599
Multi purpose solenoid, can be used on both the doors & boot for all TVR models.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
spark plug
PART No: E0152
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Spark plug lead set
PART No: E0207
Replacement Lucas plug lead set.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Speedo transducer mounting bracket
PART No: R0559
Transducer mounting bracket for vehicles using the BTR diff.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith.
|
|
|
|
Spigot bush (Rover sdi gearbox)
PART No: E0273-sdi
Models: chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
spigot bush (t5 gearbox)
PART No: E0273
Models: chimaera, griffith.
|
|
|
|
Starter motor bolt
PART No: 506121L
Starter motor mounting bolt for the Griffith & Chimaera.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
steel rocker arm
PART No: e0278-1
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Steering gaiter kit (manual rack)
PART No: H0151
Steering gaiter kit for all manual steering racks.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Steering gaiter kit (pas rack)
PART No: H0295
Steering gaiter kit for all power assisted steering racks.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Steering rack tie rod end
PART No: H0290
Replacement steering rack tie rod end for the Griffith, Chimaera & Cerbera.
Models: cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Steering universal joint.
PART No: H0072
Universal steering joint.
Models: cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Stepper motor
PART No: E0121
Engine stepper motor for the Griffith, Chimaera & earlier V8 models.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
thermal plate
PART No: e9000
part of an upgrade package
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Thernostat gasket
PART No: E0195
O.E thermostat gasket for the V8 engine.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Throttle cable
PART No: E0052
Throttle cable for the Griffith & Chimaera.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, n/a.
|
|
|
|
Throttle cable (lhd)
PART No: E0149
Throttle cable for the lhd Griffith & Chimaera.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
TIMING CHAIN KIT
PART No: E0403, E0404, E0405
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Track rod end
PART No: H0068
Replacement track rod end for he Griffith & Chimaera.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
TVR Power mug
PART No: POWCUP
TVR Power mug.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
TVR Power polo shirt
PART No: TPSHIRT
TVR Power polo shirt.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Undertray mounting bobbins.
PART No: S0024, S0178
Undertray mounting bobbins, fitted to the Griffith & Chimaera.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Upper balll joint
PART No: C0035
Upper ball joint for the entire TVR range from the Griffith onwards.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Upper universal joint
PART No: H0359
Upper universal joint for power assisted vehicles.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
V8 CAMSHAFT (4.3, 4.5 & 5.0LTR ENGINE) 885 SPEC
PART No: E0440
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
v8 engine block
PART No: powblock
large journal block (2.5")
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
V8 fan belt (pre serpentine)
PART No: E0120
Pre serpentine alternator belt.
Models: chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
VALLEY GASKET
PART No: E2084
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
valley gasket end seal
PART No: e0154
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
valve stem oil seal
PART No: e2511
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Vernier timing chain set
PART No: E0236
Griffith & Chimaera adjustable timing chain kit.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Washer bottle pump
PART No: M1388-PUMP
Replacement washer bottle pump for the VDO washer bottle.
Models: tuscan, tuscan s, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
WATER PUMP & GASKET (PE SERPENTINE)
PART No: E0199
Models: chimaera pre-serp, griffith pre-serp.
|
|
|
|
WATER PUMP (SERPENTINE)
PART No: E2585
Models: tuscan, chimaera, griffith.
|
|
|
|
water pumpp gasket (serpentine)
PART No: e0471
Models: chimaera, griffith.
|
|
|
|
Water temp sensor (late models)
PART No: N0125
Water temp sender unit for the gauge on Griffith & Chimaera.
Models: chimaera, griffith.
|
|
|
|
Wheel bearing hub nut (blue)
PART No: C0008
Front wheel bearing hub nut for the Griffith & Chimaera. Left hand thread.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Wheel bearing hub nut (yellow)
PART No: C0009
Front wheel bearing hub nut for the Griffith & Chimaera. Right hand thread.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Wilwood brake upgrade kit
PART No: J9999
Wilwood brake upgrade kit for the Griffith & Chimaera. Kit
comprises of 2 piece 298mm front brake discs, 4 pot front callipers,
braided brake hoses, heavy duty brake pads & a complete fixing kit.
Models: chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Wiper arm (lh)
PART No: M0312
Griffith, Chimaera & Cerbera wiper arm. Not compatible with last model Chimaera. Uses 16" wiper blade.
Models: cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Wiper arm (rh)
PART No: M0032
Griffith, Chimaera & Cerbera wiper arm. Not compatible with last model Chimaera. Uses 16" wiper blade.
Models: cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Wiper balde 16"
PART No: M0199
Griffith, Chimaera & Cerbera 16" wiper blade.
Models: cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Wiper control switch arm
PART No: M0136
Wiper control switch, fitted to Griffith, Chimaera & also modified to fit the mk1 Tuscan.
Models: tuscan, tuscan s, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Wiper motor
PART No: M0195
Wiper motor for the Griffith , Chimaera & cerbera. This unit is
exchange only. An exchange surcharge will apply, which is refundable on
return of the old unit.
Models: cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Wiper tube
PART No: M0328
Wash wipe tube connecting the washer jets to the main water feed line.
Models: sagaris,
tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera,
griffith, chimaera pre-serp, griffith pre-serp, wedge.
|
|
|
|
Wishbone bush
PART No: C0200
Wishbone bush for all TVr models.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Wishbone bush (rear)
PART No: D0104
Rear lower wishbone bush.
Models: sagaris, tuscan, tuscan s, t350, Tamora, cerbera Sp6, cerbera V8, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Wishbone rear lower (lh)
PART No: D0062
Rear lower wishbone for the Griffith & Chimaera. Also fitted to the
early Cerbera V8 with the non rose jointed drop link.
Models: cerbera Sp6, chimaera, griffith, chimaera pre-serp, griffith pre-serp.
|
|
|
|
Wishbone Rear lower (rh)
PART No: D0061
Rear lower wishbone for the Griffith & Chimaera. Also fitted to the
early Cerbera V8 with the non rose jointed drop link.
Models: cerbera Sp6, chimaera, griffith, chimaera pre-serp, griffith pre-serp. |
|
|
|
|
|
|
|